Build Your Own AC

AC Build at Home with a Box Fan and a Cooler:



Unscrew the front cover panel of your fan.






Twist 6 mm diameter copper tube with concentric circles from the center of the outer side of the grid.




Attach the end of a length of copper tube in the center of the grid via cable ties.





Loosen the hose in a small circle. Start by turning the hose around the original circle until you have a series of concentric circles . Close the tube grid with cable ties.


You want more hose connected to the fan grid , but not so much that the air can not pass through the space between the tube.

Screw the front, with the tubing attached to the exterior, back onto the box fan.



Attach one end of a 9.5 mm flexible clear tube to your fountain pump and the other end to the top of your copper tube . The tube is perfect for this project is the type of hose used in the fish tank .

Connect the other piece of 9.5 mm plastic tubing to the bottom end of the copper tubing. Seal the connection with plumber’s putty.



Fill the cooler with ice water. Submerge the unconnected end of the second plastic tube beneath the water.





Place the fountain pump in the cooler.





Put a towel under your fan. The towel will catch the condensation that will form on the outside of the copper pipes.






Plug in the fountain pump and turn on the fan. Your home made AC is ready to use. Enjoy your AC.



Short URL:

Posted by on Jul 22 2016. Filed under Latest Updates, TECHNOLOGY, HVAC. You can follow any responses to this entry through the RSS 2.0. You can leave a response or trackback to this entry

Leave a Reply

300x250 ad code [Inner pages]

120x600 ad code [Inner pages]
Log in | Designed by Gabfire themes